Wireless 4K Video System

MD62

The ultimate wireless video system for demanding ORs

Capabilities

Key Features

Built for the operating room - where reliability is non-negotiable.

A wireless 4K 60fps video link system built on Amimon’s 3rd generation chipsets. Delivers crystal-clear 4K video with under 1ms latency - no cables needed. The MD62’s ultra-low latency and link robustness makes it the system of choice for medical visualization in the most demanding operating room environments.

4K 60fps Video

Up to 3840×2160 at 60fps. Powered by Amimon’s 3rd generation chipset - the highest resolution and frame rate available for wireless OR video.

<1ms Latency

Ultra-low latency critical for real-time surgical visualization. Surgeons see exactly what the camera sees, with no perceptible delay.

MIMO 4×5 Antenna

Advanced multi-antenna configuration for maximum link robustness in RF-dense OR environments with competing wireless devices.

AFS & DFS

Automatic Frequency Selection and Dynamic Frequency Selection operate across the full unlicensed 5GHz spectrum (5.1-5.9GHz), always choosing the cleanest channel.

AES-256 Encryption

Military-grade encryption with RSA-1024 key exchange ensures patient video data is fully protected throughout the wireless link.

Medical Certified

Fully certified under MDR, FDA, UK, and Swiss medical device regulations. FCC, CE, MIC, Canada, and Korea radio approvals.

Performance

Technical Specifications

Key performance parameters for system integration and evaluation. The full specification sheet is available in Downloads.

Transmitter
ParameterValue
Video
Video Inputs1x 12G-SDI (SMPTE 2082-1, 75Ω), 1x HDMI 2.0 Type-A
Video Outputs1x Loopout 12G-SDI (SMPTE 2082-1, 75Ω)
Color SamplingSDI: YCbCr 4:2:2 10-bit · HDMI: RGB/YCbCr 4:4:4/4:2:2
Supported Resolutions2D: 4Kp23.98/24/25/29.97/30/50/59.94/60, 1080p23.98–60, 1080i50/59.94/60, 720p50/59.94/60 · 3D (SBS/Top-Bottom/Line-by-Line): 4Kp23.98–60, 1080p23.98–60
Physical Attributes
Dimensions5.9″L × 3.6″W × 1.1″H (149 × 91.2 × 27.1mm)
Weight12.7oz (360g)
Wireless Video Network
EncryptionAES-256, RSA-1024 key exchange
RangeUp to 100 ft (30m)
MulticastCan stream simultaneously to up to 4 receivers
Noise RejectionCoexists with Wi-Fi and other 5GHz devices; up to 6 sets at the same location
Receiver
ParameterValue
Video
Video Outputs2x 12G-SDI (SMPTE 2082-1, 75Ω), 1x HDMI 2.0 Type-A
Color SamplingSDI: YCbCr 4:2:2 10-bit · HDMI: RGB/YCbCr 4:4:4/4:2:2
Supported Resolutions2D: 4Kp23.98/24/25/29.97/30/50/59.94/60, 1080p23.98–60, 1080i50/59.94/60, 720p50/59.94/60 · 3D (SBS/Top-Bottom/Line-by-Line): 4Kp23.98–60, 1080p23.98–60
Physical Attributes
Dimensions5.1″L × 5.5″W × 1.1″H (129 × 138.8 × 27.1mm)
Weight15.3oz (434g)
Wireless Video Network
EncryptionAES-256, RSA-1024 key exchange
RangeUp to 100 ft (30m)
MulticastCan switch between 4 transmitters
Noise RejectionCoexists with Wi-Fi and other 5GHz devices; up to 6 sets at the same location
Integration

Compatible Products

ProductRole
MD11Companion base-station receiver
SL11Compatible wireless camera
Resources

Downloads

Product brochures, specification sheets, and documentation.

Ready to Integrate the MD62?

Our engineering team is available to support your integration, answer technical questions, and provide evaluation units.